Windmax Wind mill is a very well developed, reliable, well organized and cost-effective small windmill available on the market today. The Windmax H series Windmill technique is a wonderful choice inside a smart investment for just a electricity solution built on advanced technologies. The Windmax wind mill system defines a different degree of superior performance and reliability within the small windmill industry. Strong Neodymium magnet PMA, unique winding and multi pole design slow up the start-up torque of your alternator to ensure that the WINDMAX-H series has great performance at low wind speed.
The actual result: greater wind turbine yield for everyone wind speeds and lowest ownership cost.
Patented, ISO and CE certified WindMax H series will be the next generation system created with advanced technology, it really is transportable and straightforward to run. It performs significantly better and even more reliable than older style wind generators using furling the outdated technology. Oahu is the most efficient, well organized wind generator with lowest noise level and Incredible 134 mph (60 m/s) survival speed.
Windmax H series wind mill has suprisingly low noise level, it really is neighborhood friendly, the pole adjacent noise level isPatented, twisted high quality blades and intensely efficient aerodynamics design optimize angle of attack all along blades at different wind speeds that will create the best lift to tug ratio, blades are manufactured utilizing the latest advanced thermoplastic engineering and precision injection molding technology. Multifunctional Hybrid controller combines the functions of solar/wind charge control, dump load, over-charge protection, short-circuit protection and pole-confusion protectionStrong Neodymium magnet PMA, the initial winding and multi-pole design cuts down on the start-up torque in the alternator that assures the it could generate more electricity at low wind speed than others.
The Windmax H series Turbine method is a wonderful choice within a smart investment for your electrical power solution built on advanced technologies. The Windmax H series defines an innovative higher level of superior performance and reliability through the use of:
1. Strong Neodymium magnet PMA, the initial winding and multi pole design cuts down the start-up torque within the alternator that assures the WINDMAX-H series can generate electricity at low wind speed.
2. Advanced aerodynamic braking by patented nylon/reinforced fiber glass blades.
3. Electromagnetic over-speed control, eliminate problematic mechanical furling.
4. Integrated solar-wind hybrid power generation.
5. Innovative low maintenance two-moving-part system design.
6. All to easy to Install, Light-weight and highly reliable.
7. Generator: The generator is made using high-performance rare earth neodymium permanent magnets, therefore the alternator is compact and lightweight weight which includes a high power generating efficiency. Generator housing is manufactured using precision cast technology from high strength aluminum in order to guarantee an exceptional finish. Its created for various working conditions for instance severe climate, sand and salt corrosive environments and marine usage.
8. Cutting blades: Advanced airfoil design to capture maximum wind energy. Made from mixed nylon and reinforced fiber glass materials while using the latest advanced thermoplastic engineering and precision injection molding technology for high strength, flexibility and aerodynamic braking. The blades have exceptional consistency and aerodynamic outline by using a mass distribution that ensures the rotors operate with minimal vibration. Overall, Windmax H series will be the most well-built, reliable, best and cost-effective small wind generators available on the market today.
The effect: greater wind turbine yield and lowest ownership cost.
Advanced over-speed control mechanism vs. traditional style furling
Troubles with old-style furling:
Traditional style furling is successful in a perfect, wind tunnel test environment. Realistically, wind speed and wind direction changes frequently and mechanical furling won't have instantaneous respond to actual changes of wind status. Particularly in bad conditions, small wind mill furling components give up quickly, therefore, increases maintenance costs and shorten turbine service life or causes system failure.
Almost all of old-style furling based wind generators have three moving parts. Is it doesn't moving parts for mechanical over-speed protection that need replacing and have to have a great deal of maintenance. Operation of furling based wind generators would bring about mechanical abrasion, cause vibration, malfunction, and failure with the wind mill along with devastating ends up with over time.
The general rule for any reliable turbine could be that the fewer the moving parts, the greater reliable the wind generator is.
Windmax H series adopted Innovative over-speed control thus it improves the reliability by abandoning the moving parts for mechanical over-speed protection and minimizing the moving parts to simply two.
Innovative over-speed control design in the Windmax H series:
Windmax H series speed limitation abandoned the normal failure-prone mechanical furling system and solved safety and reliability problems facing most small wind generators. Advanced speed limitation of Windmax H series is achieved through advanced electromagnetic speed limitation supplemented by aerodynamic speed limitation by blade deformation. Electromagnetic braking is needed in conjunction with Aerodynamic braking to scale back the rotational speed with the generator.
Schooling would include biology Electromagnetic braking and aerodynamic braking maximizes energy capture by extending Windmax H series turbine's operating speed range into faster winds and minimize speed winds that happen to be missed with the old-style wind generators.
1. Electromagnetic speed limitation:
Controller will monitor the wind turbine rotation throughout the wind turbine output voltage and frequency, and definately will timely control wind power generator rotation by generating reverse reluctance torque if required, in accordance with different wind conditions and battery status. Electromagnetic control features quick response, high reliability and as a consequence ensures all the control system that they are highly reliable.
2. Blade aerodynamic braking:
In high wind speed conditions, patented blades will generate a reverse reluctance torque, so the blade efficiency falls as well as blade rotation speed actually starts to decline. Together with the continuing reluctance torque, blade rotation speed is fixed to the certain range to stop trouble for the wind generator blades.
Higher performance at low wind speed Trouble with small wind generator system on the market today Probably the most challenging problem facing small wind generator systems is power output may be very low or almost nothing under low wind condition. The wind speed in every locations don't stay rated wind speed constantly, windmill actually operates at wind speed below rated wind speed for the most part times. For you to have good overall energy output, it's vital for small wind mill to output around power at low wind speed. WindMax Solution: Strong Neodymium magnet PMA, unique winding and multi pole design cuts down the start-up torque from the alternator that assures the WINDMAX-H series can generate electricity at low wind speed. WindMax system components like wind turbine and blades are created to output more electricity at low wind speed than other small wind generators on the market today. WindMax system's excellent power output under low wind speed ends in greater wind turbine yield and lowest ownership cost.
Wind-solar hybrid power generation windmill system
Trouble with single source electrical power system:
1st Generation single source sustainable energy systems for instance solar systems or wind generators don't make use of alternative energy efficiently. Wind generators creates less output in the summer, whereas throughout the winter the solar panel systems will produce less output.
Our Windmax hybrid solar-wind turbine integrated wind and the power of sunshine sources capture one of the most energy in most conditions. Since solar and wind energy availability differs by locations, seasons and climates, solar and wind energy may be mutually complementary as solar and wind hybrid systems use wind and solar technology together to obtain just as much power as you possibly can in comparison with 1 source of energy for power generation. A solar & wind hybrid technique are more cost-efficient than wind or solar alone.
Easy-to-install, light-weight, compact, reliable and maintenance-free wind generators, intended for both land-based and marine applications.
Issue with old-style turbine systems: Most traditional style wind generators tend to be heavy weight with unpredictable reliability, not easy to install and require a lot of maintenance. Since that almost all installations are typically very remote and inaccessible locations, the previous style systems make regular maintenance costly and infrequently impractical. Windmax Solution: Windmax H series easy to maintain design carries a a minimum of moving parts with inherent reliability. Our lightweight, compact die-casting aluminum alloy generator design makes installation quite simple. Mower blades furnished with latest advanced thermoplastic engineering and precision injection molding technology is durable and efficient.
WindMax H series components developed with advanced technologies Generator:
Generator: The generator was made using high-performance rare earth neodymium permanent magnets, and so the alternator is compact and light-weight weight that has a high power generating efficiency. The initial winding and multi pole design decreases the start-up torque of your alternator that assures the WINDMAX-H series can generate electricity at low wind speed. The generator features class B insulation, IP55 class protection, and is also beautifully made with a satisfactory cushion of overload to be sure overall wind generator reliability.
Generator housing is produced with precision cast technology from high strength aluminum in order to guarantee a top quality finish. It really is suitable for various working conditions for example severe climate, sand and salt corrosive environments and marine usage. Aluminum die cast alloys can withstand very high operating temperatures coming from all die cast alloys. Great for demanding environments, it gives high strength and rigidity alongside good corrosion resistance and also heat dissipation.
Patented Blade design vs. traditional made by hand fiber glass blades:
Our Blades are designed using the latest thermoplastic engineering and injection mold technologies. The blades come from mixed reinforced fiber glass and nylon materials. These manufacturing technologies guarantee the highest strength, flexibility of blades and consistency on the blade shapes. The blades will automatically slow the turbine in strong winds reducing noise.
A few 3 Blades built to capture the maximum amount of wind energy as you possibly can. Patented airfoil blade design makes the whole system run far more efficiently along with the mower blades are fashioned when using the latest advanced thermoplastic engineering and precision injection molding technology.
The blades have exceptional consistency and aerodynamic outline which has a mass distribution that ensures the rotors operate with nearly no noise and minimal vibration.
The blades feature lower start-up and cut-in speed and start producing power at 2 m/s or 4. 5 mph.
Solar/Wind Hybrid Charge Controller:
This multifunctional Hybrid controller combines the functions of AC to DC rectifier, load control and dump load control for wind and/or solar systems. It eliminates the advantages of separate rectifier, solar charge controller and wind mill controller. It does not take most affordable solution for renewable power systems.
- High Reliability: Large and impressive heat sink and efficient ventilation design ensure reliable and efficient operation.
- An excellent option for hybrid wind/solar system, hybrid controller supports battery charging from simultaneous wind power generator load and solar load.
- Charge Control: Constant voltage series PWM regulation to deliver highly efficient battery charging increase battery capacity and life.
- Load control and diversion control: The controller has over-charge protection, protection, short-circuit protection, pole-confusion protection and automatic dump-load function. It can be reliable which includes a highly efficient, long service life.
- Integrated "ON/OFF Switch" in order to connect the wind mill or solar power systems into the controller.
- Uses advanced technology and automated production to produce exciting latest features in the competitive cost.